BMW Motorrad F 900 XR Rider'S Manual Download

Page: 189 / 261

Securely fasten navigation
device

NOTICE

The navigation preparation
is suitable as from the
BMW Motorrad Navigator IV.

NOTICE

The locking system of the
Mount Cradle offers no
protection against theft.
Remove the navigation system
and store in a safe place after
every drive.

Turn the ignition key

coun-

terclockwise.
Pull the shut-off lock

to the

left

Press in the locking mecha-
nism

The Mount Cradle is unlocked
and the cover

can be re-

moved with a rotational move-
ment toward the front.

Mount the navigation device

in the lower area and swing
backward with a rotational
movement.
Navigation device audibly en-
gages.
Slide the shut-off lock

com-

pletely to the

right

The locking mechanism

locked.
Turn the ignition key

clock-

wise.
Navigation device is locked and
ignition key can be removed.

187

Accessories

Summary of Contents for F 900 XR






































































































































































































































































Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands

BMW Motorrad F 900 XR, Rider'S Manual

Search results

Summary of Contents for F 900 XR

Reviews:

Related manuals for F 900 XR

Brands by name

Popular brands