BMW Motorrad F 900 XR, Rider'S Manual

Page: 161 / 261

ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
Insert spacer bushing 5 on left
side in wheel hub.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension while guiding the
brake disc between the brake
pads on the left brake caliper.
Raise front wheel and insert
axle
4 as far as possible.
Remove front wheel stand and
firmly compress front forks. Do
not actuate handbrake lever at
the same time.
Attaching front-wheel stand
(
145).
Install the axle screw 2 using
an appropriate torque. Brace
quick-release axle on the right
side at the same time.
Axle screw in front quick-
release axle
37 lb/ft (50 Nm)
Tighten left-hand axle clamping
screws
3 using an appropriate
torque.
9
159
z Maintenance