38
A
Appendix A: Gas Type Conversion
Revision 1/
© Moffat Ltd, January 2007
Blue Seal Evolution Series Gas Chargrills
Low Fire Adjustment (All Models)
1.
To set the burner low fire adjustment, the low fire
adjustment screw on the gas control valve should be
screwed fully in, then un-screwed by the measurement
shown in the “Gas Specifications” table at the end of this
section.
NOTE: The “Low Fire Adjustment Screw” should be
sealed with coloured paint on completion of the
low fire adjustment.
2.
Refit the front control panel to the chargrill and secure in
position by tightening the 2 screws on the front lower
edges of the control panel.
3.
Refit the gas control knobs to the gas control valves.
The gas control knobs are a push fit onto the shaft of
the gas control valves.
Low Fire
Adjustment Screw
Fig 24