5
2
Installation
Revision 1/
© Moffat Ltd, January 2007
Blue Seal Evolution Series Gas Chargrills
Clearances
NOTE: Only non-combustible materials can be used in close proximity to this appliance.
Assembly
NOTE:
•
All Models will require assembly. Refer to the 'Fitting of Adjustable Feet / Rollers to Leg
Stand Units' information below for assembly instructions.
•
This appliance is fitted with adjustable feet to enable the appliance to be positioned
securely and level. This should be carried out on completion of the gas connection. Refer
to the 'Gas Connection Section'.
Optional Accessories (Refer to Replacement Parts List)
•
Plinth Kit. For installation details, refer to the instructions supplied with each kit.
Bench Models
1.
Check that all the feet (or castors) are securely fitted.
2.
Adjust the feet to make the Chargrill steady and level.
Fitting Leg Stand to Chargrill
1. Remove the grates, griddle plates and
radiants from the chargrill.
2.
Lower the Chargrill onto it’s rear face.
3.
Attach the four hob legs to the leg mounting
positions on the underside of the chargrill. Se-
cure each leg hand tight.
4.
Align the four round cut out holes on the base
tray with the four hob legs already fitted to the
chargrill (Ensure that the base tray is orientated
with the sloping edge of the base tray facing the
front of the appliance.
5.
Slot the base tray onto the four hob legs and
push fully home.
6.
Secure the base tray to the front chargrill legs by
screwing the adjustable feet supplied, into the
base of the front chargrill legs. Secure each
adjustable foot, hand tight.
7.
Fit the rear rollers to the rear leg ring plates and
secure using the locating bolts supplied and
tighten bolts using a 10mm spanner.
8.
Lift the chargrill back onto its legs.
9.
Refit all the grates, griddle plates and radians to
the chargrill, ensuring that they are correctly
fitted.
NOTE: This appliance is fitted with adjustable feet / rear rollers to enable the appliance to be
positioned securely and level. This should be carried out on completion of the gas
connection. Refer to the ‘Gas Connection’ section.
Combustible Surface
Non Combustible Surface
Left / Right hand side
200 mm
0 mm
Rear
100 mm
0 mm
Fig 1
Sloping Edge
of Base Tray
Rear Roller
Base Tray
Chargrill
Legs
Leg Mount
Points
Chargrill
