6
Service Procedures
17
Revision 1/
© Moffat Ltd, January 2007
Blue Seal Evolution Series Gas Chargrills
Figure 6.2.6
6.2.6 Main
burner
injectors
1) Remove the control panel (refer 6.1.1).
2) Remove burner (refer 6.2.5).
3) Unscrew the burner injector.
3) Clean or replace as required.
Note: Ensure that the correct size injector is
refitted to the unit (refer specifications
section).
Figure 6.2.5
6.2.7 Piezo
ignitor
6.2.5 Main
burner
1) Remove control panel (refer 6.1.1).
2) Remove the HT lead from the piezo ignitor by
pulling firmly away.
3) Unscrew the nut securing the piezo ignitor to
the control panel.
Figure 6.2.7
4) Replace and reassemble in reverse order.
1) Remove the top grate and radiant castings
relevant to the burner to be removed.
2) Slide the burner out from its supports.
4) Replace and reassemble in reverse order.
Main burner
Main injector
6.2.8 H.T
lead
1) Remove control panel (refer 6.1.1) and
remove HT lead from piezo ignitor.
2) Remove HT lead from piezo electrode, replace
and reassemble in reverse order.
Figure 6.2.8
