28
Blue Coat SG200 Series
The following configuration alert displays:
Figure 2-15: Initial Setup—Configuration Alert
3
Press <Enter> three times.
When the
Welcome to the ProxySG Appliance Setup Console
prompt appears, the system is
ready for the first-time network configuration.
4
On page 1, enter the interface number, IP address, IP subnet mask, IP gateway, and DNS server
parameters.
Figure 2-16: Initial Setup—Page One
5
On page 2, you are asked if you want to finish configuration using the Setup Wizard.
****************** CONFIGURATION ALERT ******************
System startup cannot continue for one of these reasons:
(a) Need at least one adapter (or bridge) configured with an IP
address and
subnet.
(b) Need the console password and enable password.
********* SYSTEM STARTUP TEMPORARILY SUSPENDED *********
Press "enter" three times to activate the serial console
Welcome to the ProxySG Appliance Setup Console
--------------------- (page 1 of 5) --------------------
Press <ESC> at any time to return to the main menu
DIRECTIONS:
This setup console is used to assign IP addresses to the ProxySG
Appliance. After assigning the IP addresses you can connect to the
command line interface or Web interface to perform additional
management tasks.
Enter interface number to configure [0:0]:
IP address [0.0.0.0]:
10.25.36.47
IP subnet mask [255.255.255.0]:
255.255.255.0
IP gateway [0.0.0.0]:
10.25.36.1
DNS server [0.0.0.0]:
101.52.23.100
You have entered the following IP addresses:
IP address: 10.25.36.47
IP subnet mask: 255.255.255.0
IP gateway: 10.25.36.1
DNS server: 101.52.23.101
Would you like to change any of them? Y/N [No]
N