49
CONNECTING THE Baby b. TO A PC FOR
MIDI DUMPS; SAVING PRESETS
1) Connect the MIDI OUT jack of your Baby b. with the MIDI IN jack on
your PC (or Sequencer hardware). Connect the MIDI OUT jack of your
PC with the MAIN IN jack on the Baby b..
2) Connect the included powersupply to the POWER IN jack on the Baby
b.. Power up both PC and Baby b.. If you are using a PC with MIDI
software, load the appropriate software on the PC.
SAVING PRESETS
3) Press the EDIT button and then the VALUE UP button until the display
shows „bul“ for BULK. Set your MIDI software to receive system
exclusive MIDI data.
4) Press the EDIT button to begin the transfer. You can monitor the transfer
progress in the Baby b.‘s display. Save the data received in your MIDI
software to a data medium (hard drive, diskette, etc.)
LOADING PRESETS
Load your MIDI software containing the presaved Baby b. BULK DUMP.
Use the appropriate commands in your software to begin sending the data
to the Baby b.. You can monitor the transfer progress in the Baby b.‘s
display. Do not press any buttons on the Baby b. during the transfer.
UP
DOWN
PRESET
EDIT
PROGRAM / VALUE
VALUE
➤
➤
STORE
FUNCTION
MODE
TRANSP.
PRESET
Summary of Contents for Baby b.
Page 56: ...56 MIXERMAP LOWER BASS MIXERMAP PROGRAM...
Page 57: ...57...