51
SOFTWARE UPDATE WITH A PC
Your Baby b. is equipped with the special feature of being able to update its own operating system via
MIDI. In this way it is possible for you to install the latest system software updates including newly
added functions and features without having to open the case and install chip or cards. Contact your
dealer to obtain system software updates.
In order to update your system software, you will need a PC with MIDI sequencer software. If you
don´t own the appropriate equipment, perhaps your dealer will update the software for you if you take
the Baby b. in. Or perhaps you can borrow the equipment from a friend.
1. Connect your Baby b. and PC/software as described in the section "Connecting the Baby b. to a
PC for MIDI Dumps".
2. Start your MIDI software and load the Baby b. MIDI DUMP file containing the system software
update.
3. Begin the transfer by using the appropriate system exclusivesend command in your MIDI software.
When the tranfer is finished "End" appears in the display.
4. Turn your Baby b. off and back on. The new system software is now in operation.
If an error occurs during the transfer, "ErP" appears in the display. Set your MIDI software (songpointer)
to begin the transfer, and reinitiate the transfer.
SENDING THE INTERNAL OPERATING SYSTEM SOFTWARE TO A PC OR TO
ANOTHER Baby b.
Using the MIDI OUT port you can send the Operating System software to a PC or to another Baby b..
The operating system is 250 kb.
1. Press the EDIT button on the baby b. with the new software and then the DOWN button until in
the display appears „rod“.
2. Press and hold STORE, EDIT and MODE buttons on the baby b. with the old software and while
holding them, power up your baby b.. In the display appears the software version and the message
"LOD".
3. Use the EDIT button on the baby b. with the new software to begin the transmission. When the
transmission is finished, you will see „END“ in the display of the other baby b..
Summary of Contents for Baby b.
Page 56: ...56 MIXERMAP LOWER BASS MIXERMAP PROGRAM...
Page 57: ...57...