29
EDIT BUTTON
Using the EDIT button brings you to the edit mode of your Baby b.. Here you can set a series of global
parameters that control the MIDI system. In addition you have the option of saving all your present
preset settings over MIDI (Bulk Dump) or loading previously saved settings.
1) Press the EDIT button.
2) Use the VALUE UP/DOWN buttons to cycle through the available parameters in order to get to
the one you want to change. The display shows you appropriate abbreviations for the active
parameters. (A description of the available parameters follows shortly.)
3) Press the EDIT button again to see the value of the present parameter or function.
4) Use the VALUE UP/DOWN buttons to change the value according to your desire.
5) Press the EDIT button again and the new value or function is saved and you are returned to the
starting point.
GLOBAL PARAMETERS
Pressing the EDIT button allows you access to the following parameters and their respective values:
SELECT MIDI CHANNEL FOR UPPER
(MIDI Channel assignment for the upper manual: OFF, 1 ... 16)
Use this parameter to set the MIDI channel used to play the upper manual of your
Baby b.. This channel should be the same as the channel you have assigned in your
MIDI controller keyboard or the split you want to play the upper manual. The default
value is channel #1. If you want to use another channel, set it here. The setting „OFF“
turns the entire manual off. If you are using equipment that is capable of playing more
than one MIDI channel at a time (eg: more than one keyboard or pedal bank, split-
capable keyboard), make sure you have a separate channel set for each manual.
Notice: Even using a keyboard without a split point set, you can still
use the areas UPPER and LOWER. See the section called „Split point on one MIDI channel“
SELECT MIDI CHANNEL FOR LOWER
(MIDI Channel assignment for the lower rmanual: OFF, 1 ... 16)
Use this parameter to set the MIDI channel used to play the lower manual of your
Baby b.. This channel should be the same as the channel you have assigned in your
MIDI controller keyboard or the split you want to play the lower manual. The default
value is channel #2. If you want to use another channel, set it here. The setting „OFF“
turns the entire manual off. If your MIDI keyboard can only play one channel, make
sure this manual is set to „OFF“. If you are using equipment that is capable of playing
more than one MIDI channel at a time (eg: more than one keyboard or pedal bank,
split-capable keyboard), make sure you have a separate channel set for each manual.
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
Summary of Contents for Baby b.
Page 56: ...56 MIXERMAP LOWER BASS MIXERMAP PROGRAM...
Page 57: ...57...