![background image](http://html1.mh-extra.com/html/blue-chip/baby-b/baby-b_user-manual_2775490012.webp)
12
CONNECTING THE Baby b. TO 2 MIDI KEYBOARDS WITH A MIDI
MERGE BOX
1) Connect both AUDIO OUT jacks on the Baby b. with your amplifier using two (MONO) quarter
inch cables. If you not be sending a stereo signal, use just the LEFT/MONO output jack on the
Baby b.. For an optimal Rotor sound you should connect your Baby b. in stereo.
2) Connect the MIDI out jack on both keyboards with the MIDI IN jacks on the (optional) MIDI
MERGE box. From the MIDI OUT jack on the merge box, connect to the MAIN-IN jack on the
Baby b.. Use 3 standard 5-connector MIDI cables.
3) If you will be using a MIDI capable bass pedal bank, connect its MIDI out jack with the PE-
DAL-IN jack of the Baby b.. Plug in the powersupply for the pedal bank.
4) Connect the quarter inch cable of a volume pedal to the SWELL PEDAL jack, if you will be
using one. If you have one, or even better, two foot switch pedals, connect them to the PEDAL-
1 and PEDAL-2 quarter inch input jacks. If you only have one pedal, you need to decide whether
you would rather use it to control Rotor rotor speed (PEDAL-1) or sustain effect (PEDAL-2).
Note: If one of your MIDI master keyboards allows for connecting volume pedals or switch pedals
to it, you can connect your pedals to it instead if you desire.
5) Connect the included power supply to the POWER-IN jack of the Baby b. and plug it into your
power source. Turn on the power switch on your Baby b. as well as your MIDI and amplifier
equipment. Play some keys on your MIDI keyboard to make sure the connetions are functional.
6) Set the MIDI OUT channel of the keyboard you will using for the upper manual to MIDI channel
1 and the channel for the keyboard you will be using for the lower manual to channel 2. If you‘re
not sure how to do this, see the user‘s manual of your master keyboard or your dealer. Normally
your Baby b. uses MIDI channel 1 for the upper manual, MIDI channel 2 for the lower manual,
and MIDI channel 3 for the pedal bank. It could be necessary for you to change these channel
assignments in your Baby b.. See „EDIT Key/Global Parameters.“
Summary of Contents for Baby b.
Page 56: ...56 MIXERMAP LOWER BASS MIXERMAP PROGRAM...
Page 57: ...57...