![background image](http://html1.mh-extra.com/html/blue-chip/baby-b/baby-b_user-manual_2775490030.webp)
30
SELECT MIDI CHANNEL FOR PEDAL
(MIDI Channel assignment for the Bass pedal bank: OFF, 1 ... 16)
If you have access to a MIDI-capable foot pedal bank, you can set the channel here
to be used for the pedal manual of your Baby b.. The default value is channel #3. If
you want to use another channel, set it here. The setting „OFF“ turns the entire manual
off. If your MIDI keyboard can only play one channel, make sure this manual is set
to „OFF“. If you are using equipment that is capable of playing more than one MIDI
channel at a time (eg: more than one keyboard or pedal bank, split-capable keyboard),
make sure you have a separate channel set for each manual.
PITCHBEND RANGE
(The range limits for pitchbend information: 1 ... 12)
Here is where you set the maximum number of half steps that the pitch of a note can
be bent using a controller from your MIDI keyboard. The increments are half steps
and the maximum range is twelve; one octave. The default value is 12 and should be
set to match the value set for pitchbend range in your MIDI controller keyboard.
RECEIVE CONTROL CHANGE COMMANDS
(Settings: OFF or ON)
Using this parameter you can determine whether or not incoming control change
information will be processed. Control change commands contain special information
about elements that relate to control-oriented functions such as Volume level
(Controller #7), or drawbar settings (Controller #20 up to 29). Your Baby b. is also
capable of sending MIDI data, especially data relating to the drawbar system, and
because of this, it might be necessary for incoming controller information to be
squelched. In this case, set this command to „OFF“.
TRANSMIT CONTROL CHANGE COMMANDS
(Settings: OFF or ON)
If necessary, setting this function to "OFF" prohibits sending control change data from
the Baby b. to external MIDI devices (eg: drawbar movements, pedal confirmation).
RECEIVING PROGRAM CHANGE COMMANDS
(Settings: OFF, ALL, 1 to 128)
The Baby b. can react differently to incoming program change information.
Setting OFF
No Program Change information is processed.
Setting ALL
Program Change information will be received on the MIDI channel selected under UPPER (factory
preset 1) and presets 1 to 99 can be selected.
Setting 1 to 128
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
UP
DOWN
PRESETS - EDIT FUNCTION
EDIT
STORE
Summary of Contents for Baby b.
Page 56: ...56 MIXERMAP LOWER BASS MIXERMAP PROGRAM...
Page 57: ...57...