Operating Instructions and Parts Manual
BCPA1
9
TROUBLESHOOTING CON’T
www.blueangelpumps.com/AdvancedText
The alarm is
going off
even though the
dual float switch
is not
submerged in
water
The dual float switch is
obstructed by debris
One, or both, of the
input jacks connecting
to the device is loose
or
unplugged
Check the dual float switch for
debris, clear obstruction and
reset device
Push both wires firmly into the
connector jacks on the device
and verify they are tight
Text messages
arrive out of
order
Poor signal strength
Cellular network
congestion
Locate the Advanced Text
Notification device to an area
with better cellular reception
No remedy
The Advanced
Text Notification
device is not
communicating
with my phone
The phone number
was entered incorrectly
Double check the phone number
entered, as a contact in Step 5.
Make sure you did not put a “1”
in front of the area code
NOTE:
If you have added a phone number in error or you want to
change a contact number type “Phone1{space}none”
If the incorrect number is Phone2 or Phone3 repeat the
sequence above for the correct number
You will receive a confirmation text from your device that
the number has been cleared. Repeat Step 7 to enter a
new emergency contact number
