SERVICING INSTRUCTIONS
CAUTION
Electric Shock
Hazard
Opening access panels or
removing warmer plates on this
brew may expose uninsulated
electrical components.
Disconnect brewer from
electrical power before
removing any panel.
ACCESS PANELS
TOP PANEL:
Remove top panel to access hot water tanks, thermostats,
thermo probe, heating elements and main power switch.
Top panel is held by a retaining lip at the front and two screws
near the middle top.
FRONT PANEL:
Remove front panel to access to terminal block, brew timer, and
faucet water level controller.
Front panel is held by two retaining clips under main warmer
cover plate and a retaining lip at the top.
SOLENOID DOOR:
Remove solenoid door to access solenoid plumbing connections.
Solenoid door is held by two screws and a retaining lip.
THERMOSTAT ADJUSTMENT:
Thermostat adjustments may be accessed by removing
appropriate button plug from right side. Rear/upper is for faucet
water, front/lower is for coffee brew water.
WARMER ELEMENTS (8783MCD only):
Element covers unscrew by turning counterclockwise. Warmer
elements lift out.
Fig. 9 Access Panels
11
