![background image](http://html.mh-extra.com/html/blonder-tongue/aqt8-ip/aqt8-ip_user-manual_2774527026.webp)
26 AQT8-QAM/IP
User Manual
6.6 "Main > Output" Screen
The “Main > Output” screen (Figure 6.6) is a “user-configurable” screen for the Output Mode. The Output Mode is
selectable from 1 to 8x IP Outputs or disabled.
Figure 6.6 - "
Main >
Output" Screen
Remember
to
click
on
the
SAVE
button
to
apply
the
new
values/configurations.
When output mode is disabled, "IP Output Config" tab and "MPTS Output Config" tab will not appear on
web page. Must have at least 1 output enabled to use tabs.
6.7 "Main > QAM" Screen
The “Main > QAM” screen (Figure 6.7, next page) is “user-configurable” for assigning QAM parameters.
RF Output Level:
Selects the QAM RF output level for the combined output. The range is 28 to 42 dBmV.
Output Channel/Frequency:
Allows
the user to assign an RF channel number to the RF QAM output of the Quad-
QAM module (i.e. RF channel 54, as shown in Figure 6.7, “Module 2”). The remaining three RF QAM channels will
be automatically assigned to the next higher adjacent channels (i.e. RF channels 55, 56 and 57). The range is NTSC
channels 2 to 155.
Output Control:
Allows the user individually turn on/off each of the 4 QAM RF channels.
1
2
3
The
RF Channel number will be displayed on TV only if the source stream does not carry any virtual
Channel number.