![background image](http://html.mh-extra.com/html/cisco/dwdm-x2-series/dwdm-x2-series_installation-notes_67767001.webp)
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco 10-Gigabit Ethernet X2 Transceiver
Modules Installation Note
Revised: September 23, 2011
Product Numbers:
This installation note provides the installation instructions for the 10-Gigabit Ethernet X2 transceiver
modules listed above and contains these sections:
•
Overview, page 1
•
Safety, page 7
•
Required Tools, page 13
•
Installing the 10-Gigabit Ethernet X2 Transceiver Module, page 13
•
Removing the 10-Gigabit Ethernet X2 Transceiver Module, page 17
•
Translated Safety Warnings, page 19
•
Related Documentation, page 24
•
Obtaining Documentation and Submitting a Service Request, page 25
Overview
The 10-Gigabit Ethernet X2 transceiver module is a hot-swappable I/O device that plugs into 10-Gigabit
Ethernet ports.
Figure 1
shows an X2 transceiver module with the major features identified. The X2
transceiver module connects the electrical circuitry of the system with the optical or copper network.
X2-10GB-SR=
X2-10GB-LR=
X2-10GB-ER=
X2-10GB-ZR=
X2-10GB-CX4=
X2-10GB-LX4=
X2-10GB-LRM=
DWDM-X2-xx.xx=
X2-10GB-T=