7
HDE-8C DIN Series
Instruction Manual
CONTROL 10/100:
RJ45 connector for 10/100Base-T Ethernet interface for monitoring and configuring the unit. Only
static IP address can be assigned to this interface. (Factory Default: “172.16.70.1”)
EAS INPUTS:
RCA connectors for EAS Analog Audio (marked L & R) and Composite Video (marked Video) inputs.
EAS CONTROL:
Terminal strip to activate the EAS messaging
feature in one of the two following ways:
a) 5-12 VDC between terminals 1 & 3 shown to the right.
b) Dry Contact between terminals 2 & 3 shown to the right.
NOTE:
This feature is intended to activate EAS and override all of the input programs (whether Component
or Composite) with the EAS INPUT (see above for details). The QAM OUT (see ,
) will contain
the video and audio present at the EAS INPUT.
INPUT POWER:
IEC 14 power inlet plug - rated 110/230 VAC; 1.0/0.5A; 60/50 Hz; equipped with Slo-Blo, 3.0 Amps, 250
V Fuse.
Description (continued):
9
10
12
11
1 2 3
(
Ground
)
EAS feature is functional only when (i) EAS Control is triggered ON, and (ii) Video is detected on EAS INPUT connectors.
The EAS feature will not be functional unless both these conditions are met.
Stock # 3703 - H258C DIN Cable:
10
7
