15
HDE-8C DIN Series
Instruction Manual
Section 6 - Configuring the Unit
6.1 Accessing the Unit Via the Web Browser
You must complete the steps described in
before proceeding as follows:
(1)
Open a web browser on your computer (Internet Explorer 7 or higher is recommended) and enter the following URL
address
(http://172.16.70.1)
. The “Login” Screen (
) will appear.
(2)
Enter the following case-sensitive factory-default Username and Password, and click on the “Submit” button.
NOTE:
When logged in as Admin, the user has read and write permission. Only one Admin can be logged in at a time.
When logged in as Guest, the user has only read permission. Up to four Guests can be logged in simultaneously.
Username =
Admin
(case-sensitive)
Password =
pass
(case-sensitive)
- OR -
Username =
Guest
(case-sensitive)
Password =
pass
(case-sensitive)
Monitoring and configuration of the unit is achieved via a series of web pages as described in the Sections below. The
following read-only information is displayed in a
“Page Header”
– in blue color – on top of each web page:
ESN:
unit’s Serial number
Headend name:
a user-defined field to make identification easier
Temperature:
temperature of unit’s chipset.
Uptime:
time elapsed since last time the unit was turned on
Location:
a user-defined field to make identification easier
As shown in
, under the blue “
Page Header
” the following Primary tabs will appear:
•
Primary tab “
Main
” includes the following sub-tabs: Status, Input Config, Settop Control, Encoder, Output, and Refresh.
•
Primary tab “
Network
” doesn’t include any sub-tab.
•
Primary tab “
Time
” doesn’t include any sub-tab.
•
Primary tab “
Event Log
” doesn’t include any sub-tab.
•
Primary tab “
Update
” doesn’t include any sub-tab.
•
Primary tab “
Admin
” doesn’t include any sub-tab.
•
Primary tab “
Logout
” doesn’t include any sub-tab.
Each Primary and sub-tab is described in the subsequent Sections.
Figure 6.1 - “Login” Screen
PAGE
HEADER
{
