28 HDE-8C DIN Series
Instruction Manual
6.7 “Network” Screen
The “Network” screen (
) is a user-configurable screen where the following parameters are displayed or configured:
Control Port MAC Address:
indicates the MAC Address of the “Control 10/100” Port.
Receivers Control Port MAC Address:
indicates the MAC Address of the “Receivers Control 10/100” Port.
GigE Port MAC Address:
indicates the MAC Address of the “Data Out 1 GigE” Port. (QAM/IP Model Only)
Software Version:
indicates the software version of the unit.
FPGA Version (1 - 5):
Indicates the current hardware version of each FPGA chipset within the unit.
Modulator Version:
indicates the current version of the QAM Modulator firmware
1
2
3
4
5
6
6.6.4 “Main > Output > Refresh” Tab
The “Refresh” tab can be clicked while you are on any of the following sub-tabs screens: “TS Config”, “QAM”, and “IP”
(QAM/IP Model Only). When clicked, the Refresh tab will update all relevant fields/parameters of the active screen as that
information is retrieved from the unit in a real-time basis.
Figure 6.7 - “Network” Screen
1
2
3
4
6
7
8
9
10
11
12
13
14
15
16
17
20
18
21
19
22
5
QAM/IP Model Only
