19
HDE-8C DIN Series
Instruction Manual
Line #:
Not to be confused with Input #. This is the sequence the encoder obtained the receiver information.
Remove:
Select the receivers to be removed, then press SAVE.
Receiver:
Indicates the Receiver Number.
Software Rev:
Indicates the software version of each receiver.
Accessible:
Accessible thru IP, green=accessible, red=not.
Channel:
Receiver's channel number.
Save:
Press Save to store changes.
6
7
6.4.2 “Main > Settop Control> Diagnostics” Screen
This page allows the user to remove receivers from the HDE-8C DIN unit's database.
WARNING:
Once Saved, changes cannot be undone.
Figure 6.4.2 - “Main > Settop Control > Diagnostics” Screen
1
2
3
4
5
1
8
2
9
7
3
10
4
11
5
12
6
13
