30
HDE-8C DIN Series
Instruction Manual
6.8 “Time” Screen (continued)
6.9 “Event Log” Screen
The “Event Log” screen (
) is a “read and write” screen where the following parameters can be displayed or
configured. The data in the Event Log can be forwarded to a SysLog database – (see , , and of
for
details). The lines are color coded as follows:
Red font
= error message
Blue font
= informational message
Green font
= confirmation or feedback message
Event Log Destination:
see of
for details.
Log Destination Port #:
see of
for details.
Clear Log:
allows the user to clear the records generated during unit’s boot-up process and operation afterward. The
records are cleared if the unit loses power.
Lines to Display:
allows the user to select the number of lines to be displayed. The unit supports up to 400 MB of data
or approximately 65,000 lines. The range is 1 to 65,535.
Save Number of Displayed Lines:
allows the user to save the error log on the screen. Please note that the event log
would be saved only on the screen and not on any database.
Figure 6.9 – “Event Log” Screen
1
2
3
4
5
24
25
1
2
3
4
5
28
29
30
In the section entitled “
Time Adjustments
”, the local time zone on Coordinated Universal Time (UTC) can be set.
In the section entitled “
Daylight Saving Time
”, the user can apply the Daylight Savings settings either manually or
automatically using the DST Adjustment option.
In the section entitled “
NTP Server
”, the user can enter the IP address of the NPT server to acquire the time directly
from NTP Server when an internet connection is available (see of
for details).
In the section entitled “
Set Date & Time
”, the user can manually enter the date and time.
3
4
Remember to click on the buttons below the individual sections or the “Apply All Time Settings” to apply and
save the new values/configurations.
26
2
1
