BLN nobel G5, Technical Manual

Page: 121 / 142

G5 Weighing Instrument
9-3
•
fraction of the maximum permissible error p
ind
From indicator part certificate.
•
maximum value of cable length
per wire cross section 6
wiremax
From indicator part certificate.
Table for Load cell
•
maximum capacity E
max
From test certificate.
•
minimum dead load E
min
From test certificate. If not specified, set 0.
•
accuracy class class
From test certificate.
•
rated output C
From test certificate or data sheet.
•
maximum number of verification intervals n
LC
From test certificate.
•
minimum verification scale interval v
min
or the ratio Y=E
max
/v
min
. (
≥
n
LC
) Y
From test certificate.
•
minimum dead load output return DR
or the ratio Z =E
max
/(2. DR ) Z
From test certificate.
Only for multi interval instruments.
•
input resistance of single load cell R
LC
From test certificate or data sheet.
•
lower limit of temperature range T
min
From load cell test certificate.
•
upper limit of temperature range T
max
From load cell test certificate.
•
fraction of the maximum permissible error p
LC
From load cell test certificate.
Table for Connecting elements
•
fraction of the maximum permissible error p
con
Set to 0.5.
The connecting elements must be from the list in WELMEC 2.4. The KIS 3 load
cell mounting kit is found from August 2001, issue 2.