BLN nobel G5, Technical Manual

Page: 113 / 142

G5 Weighing Instrument
7-3
Remote Access Login and Logout
Entering the IP Address of the desired instrument in the address field of the browser
will have the instrument Web Server presenting the login form, see the picture below.
Login form
The user ID is always ‘G5User’ (case sensitive) and the password is by default ‘1937’.
It is possible to change the password in the
Main Menu / Network Configuration /
Server Configuration menu. Note that the FTP Server have its own password (default
is 1937 also for the FTP server).
If wrong password is entered the Access Denied page will displayed. Usually this will
happen after three failed login attempts or if the Cancel button is clicked. By clicking
the Refresh text or by clicking the refresh button on the browser the login form will be
displayed again. Clicking the Close text will close the browser (not possible on every
browser). See the picture below.
Access denied screen
When the correct login credentials are entered the entry screen will be displayed. This
picture will show the Instrument Name (if set) or possible start up errors (serious and
fatal errors). Any errors shown here must normally be corrected from the instrument
and not through remote access. If the start mode of the instrument is ‘Command’ this
will be shown on the entry screen. Note that the start command must be given from the