Blitz Master Gear 1,0, Operating Instructions Manual

Page: 35 / 146

3 5
Operating Instruction
Inspection /Maintenance
7 Inspection / Maintenance
7.1 Maintenance Plan
What? When? Description
Cleaning When nec-
essary
7.2
Check Bushes Every 250
hours
7.3
Check oil level top
up
Yearly 7.4
Hydraulic oil
change
- 7.4
Inspect oil hoses Yearly 7.9
7.2 Cleaning
Danger
Secure that the machine is out of use
Clean
• your machine regularly
• especially the stickers (picture symbols) on
the machine.(when the stickers are no
longer readable please order new ones,
order number see spare parts lists)
• working areas of the rollers
7.3 Mechanical
The machine is delivered with maintenance
free bushes. Therefore the bushes only have
to be checked regularly (250 working hours)
for wear.
7.4 Maintenance of the hydraulics
Danger
Hydraulic oil can cause irritation and
skin rashes. Avoid prolonged skin con-
tact and wash the skin thoroughly af-
ter contact.
Wear protective clothing! (see chapter
1.8)
Protect the environment:
The handling and disposal of mineral
oils is covered by laws. Dispose of old
oil at an authorised disposal unit. In-
formation can be found from the re-
sponsible authority. Be careful not to
spill any hydraulic oil. Make precau-
tions to catch any spilt oil oil resistant
covers, drip tray etc.)
This machine is filled with bio-oil on syn-
thetic base.
This oil is not mixable with water.
The biological removable hydraulic-oil is
mixable with mineral-oil, but then it will
loosen his biological removability.
The following or equivalent can be used:
ELF XPD 98064 (in this machine).
WARNING!
Maintenance and repair work only permitted on a table without a load.
For all cleaning, maintenance, and repair work within the lifting
mechanism, the table shall be lowered ontothe inspection support.
Use only original spare parts of the manufacturer.
Only specialists are allowed to work on the hydraulic and the mechanical
system.