83
FRANÇAIS
ENGLISH
ESPAÑOL
Set-up/Basic settings
Activating/deactivating the system security coding
Activating/deactivating the security coding
In the Security Set-up you can activate the coding for your TravelPilot. If the
coding is active, it will not be possible to start the system after it has been dis-
connected from the vehicle battery unless the correct code number is entered
(refer to “Switching on coded systems after they have been disconnected from
the vehicle battery”).
Note: Because the TravelPilot has not been equipped with any oth-
er theft-protection system, we strongly recommend that you acti-
vate the coding and the LED.
To activate/deactivate the coding,
Mark the menu item
CODE in the Set-up menu Security and
Press
OK
8
.
The coding will be activated/deactivated. The current setting will be displayed
behind
CODE. For security reasons, it will now be necessary to enter the code
to confirm this selection.
OFF is the default setting, i.e. the code is not activated.
Activating/deactivating the code-LED
To indicate that your TravelPilot is protected from theft by the code, you can
activate the code-LED. The code-LED lights up in the
ON
button
2
. If LED has
been activated in Set-up Security, the
ON
button
2
will flash when the system
and the vehicle ignition have both been switched off.
To activate/deactivate the code-LED,
Mark the menu item
LED in the Set-up Security menu and
Press
OK
8
.
The code-LED will be activated/deactivated. The current setting will appear be-
hind
LED. ON is the default setting.
Set-up menu Security
5 RNS 150 gb
17.02.2000, 15:24 Uhr
83
