81
FRANÇAIS
ENGLISH
ESPAÑOL
Calibrating the system after a tire change
After a tire change it might be necessary to calibrate the TravelPilot again.
Select
CALIBRATION from the Set-up menu Install.
Mark and confirm the menu item
TYRE CHANGE.
Follow the instructions given to you by the system.
Calibrating the system manually
You can also calibrate the system manually. To do so, you have to drive a dis-
tance of at least 350 feet at a maximum speed of 19 mph. Please note that the
distance must be measured out exactly.
Select
CALIBRATION from the Set-up menu Install.
Mark and confirm the menu item
MANUALLY.
Now you will be required to enter the distance you intend to drive.
Select the first digit indicating the distance and
Press
OK
8
.
Enter the remaining digits in the same way.
Press the
symbol and
OK
8
to confirm your entry or press
OK
8
for
a longer time.
You will be instructed to drive this distance.
Use
<< >>
on the rocker switch
7
to select
START.
Follow the instructions given to you by the system.
Set-up/Basic settings
Menu manually calbration
5 RNS 150 gb
17.02.2000, 15:24 Uhr
81
