80
Follow the instructions given to you by the system and
Press
OK
8
.
You can cancel the process at any time. If you want to end the installation,
Use
<< >>
on the rocker switch
7
to select
CANCEL and
Press
OK
8
.
The previous menu item in the installation will appear.
Following the system test the system will perform the actual calibration. To do
so, you must drive a distance of 8 to 10 miles with good GPS reception.
First select the option you require,
NEW INSTALL or TYRE CHANGE.
Press
OK
8
.
Before the process begins, you will be prompted to confirm the deletion of any
old calibration information.
Note: If you select
NEW INSTALL, route guidance is not possible
during the first 25% of the calibration process.
The distance you will be required to drive depends on a number of
different factors such as the quality of GPS reception and the route.
The number of miles given is only a guideline. The distance can be
much shorter or much longer if conditions are unfavorable.
Set-up/Basic settings
Set-up menu Install
Status menu Calibration
5 RNS 150 gb
17.02.2000, 15:24 Uhr
80
