20
Selecting a FM station
There are several ways in which you can select radio stations with the TravelPilot.
Automatic station seek tuning
To select radio stations automatically,
Press on the rocker switch
7
to start station seek tuning upwards or
on the rocker switch
7
to start station seek tuning downwards.
If the TA function is active, the system will select only those stations which sup-
port traffic information (TP symbol in the display).
Note: You can customise the search settings. Please read the section
on “Setting the search sensitivity” in the Setup/Basic Settings
chapter.
Paging through the broadcasting network (with RDS only)
You can select RDS stations within reception range directly. If it is possible to
receive several stations which belong to the same broadcasting network, you
can press
<< >>
on the rocker switch
7
to page up or down through these
stations.
Note: This function will not operate unless these stations have been
picked up by the radio receiver at least once. You can, for example,
start SCAN seek tuning or the Travelstore function. For more infor-
mation, refer to the corresponding sections on Scan seek tuning or
Travelstore.
Manual station tuning
If you know a station’s frequency, you can also select it manually. This is useful
if you would like to select a station which is not detected by automatic seek
tuning. Important: the RDS function must be switched off in the DSC menu.
Radio operation
2 RNS 150 gb
17.02.2000, 15:17 Uhr
20
