manualshive.com logo in svg

Blaupunkt TravelPilot RNS 150 US, Installation Instructions Manual

Share
Download
Blaupunkt TravelPilot RNS 150 US Installation Instructions Manual Download Page 5

5

FRANÇAIS

ENGLISH

ESPAÑOL

The TravelPilot has been designed for use in cars.

The special information required by navigation systems for trucks
or busses, such as height restrictions or maximum permissible
loads, is not included on the navigation CDs.

Operating the system while driving - Safety first

If you do not focus your full attention on the traffic situation at all
times, you could cause serious accidents.

To avoid being distracted by the TravelPilot, please observe the
following information:

•

Before you take your first trip using the TravelPilot, make
yourself familiar with the system and its operation.

•

Find a suitable area to temporarily park your vehicle if you want
to re-program the TravelPilot.

•

Do not make any adjustments to the TravelPilot while driving.

•

Do not attempt to enter your destination unless the vehicle is
stationary in a safe location.

Safety notes

    1 RNS 150 gb

18.02.2000, 9:58 Uhr

5

Summary of Contents for TravelPilot RNS 150 US

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands