RackSwitch G8264 Installation
BPP-00039-00 rev 2, January 2011
Chapter 2: Installing the RackSwitch G8264
43
The switch performs initial self tests, and displays the
Password:
prompt,
similar to the following screen:
At the
Password:
prompt, enter the switch password, and press
<Enter>
.
The default password is
admin
Default Configuration
The switch software contains default configuration files that are loaded at the factory. The default
configuration is part of the software; it cannot be deleted or changed. The default settings allow the
switch to perform basic functions with minimal effort by the system administrator.
Configuring an IP Interface
To manage the switch using Telnet, SNMP, or a Web browser, you must have an IP interface. Use
DHCP (enabled by default) or manually configure the following IP parameters:
IP address
Subnet mask
Gateway address
Memory Test ................................
Production Mode
PPCBoot 0.0.0.10 (new flash)
Memory Test (0x00) .............................PASSED
...
Blade Network Technologies RS 8264
Jan 1 00:01:27 2011:
NOTICE-5:Interface Oper Status Indication - Port 7 State UP
Password:
