RackSwitch G8264 Installation
16
Chapter 1: RackSwitch G8264 Description and Specifications
BPP-00039-00 rev 2, January 2011
The system LEDs are described in the following table:
The following table describes the system LED indications:
!
Service indicator
Power supplies and power input status
Fans status
S
Stacking indicator
Table 5
System LEDs Status
Function
Service
Power Supply
Fans
Stacking
Total Power Failure
Off
Off
Off
Off
Service Required
Blink Blue
Blink Green
(Note 1)
Blink Green
(Note 2)
Blink Green or Solid
Green (Note 3)
Power Supplies OK
N/A
Solid Green
N/A
N/A
Power Supply Failure
Blink Blue
Blink Green
N/A
N/A
Fans OK
N/A
N/A
Solid Green
N/A
Fan Failure
Blink Blue
N/A
Blink Green
N/A
Stack Master
Off
N/A
N/A
Blink Green
Stack Backup/Member On
N/A
N/A
Solid Green
Stack Error
Blink Blue
N/A
N/A
Blink Green or Solid
Green
Non-Stack Member
Off
N/A
N/A
Off
Operations Command
Solid Blue (Note 4) N/A
N/A
N/A
Note 1
: If Service required is due to Power Supply Failure, this LED blinks. Otherwise it is Solid Green.
Note 2
: If Service required is due to Fan Failure, this LED blinks. Otherwise it is Solid Green.
Note 3
:
I
f Service required is due to a stacking error, this LED blinks or is Solid Green, depending on its last
known good state.
Note 4
: If an Operations command is sent to the Unit, this LED is Solid Blue. It can be used to locate the device.
