manualshive.com logo in svg

BLADDERSCAN BVI 9400, Operation & Maintenance Manual, Page: 6 / 84

Share
Download
BLADDERSCAN BVI 9400 Operation & Maintenance Manual Download Page 6

ii

SETTING UP  ........................................................................................................................................................34

Procedure 1.  Perform the Initial Inspection ...............................................................................................34

Procedure 2.  Set Up the Battery ...............................................................................................................35

Procedure 3.  Attach the Probe to the Console ..........................................................................................37

Procedure 4.  Program the Facility Name ...................................................................................................38

Procedure 5.  Set the Date and Time .........................................................................................................40

Procedure 6.  Load the Thermal Paper ....................................................................................................... 41

Procedure 7.  Attach the Instrument to a Medical Cart (Optional) ..............................................................42

Procedure 8.  Install Scan Point with QuickPrint (Optional) .........................................................................44

Procedure 9.  Watch the Onboard Tutorial .................................................................................................44

USING THE DEVICE .............................................................................................................................................45

Procedure 1.  Prepare for the Exam ...........................................................................................................46

Procedure 2.  Measure Bladder Volume .....................................................................................................47

Procedure 3.  Save, Review, & Print Exam Results .......................................................................................50

Procedure 4.  Delete a Saved Exam ........................................................................................................... 51

CLEANING & MAINTENANCE .............................................................................................................................52

Procedure 1.  Clean & Disinfect the Instrument ..........................................................................................53

Regular Inspections ...........................................................................................................................................54

Maintenance .....................................................................................................................................................55

Procedure 1.  Run a Self‑Test .....................................................................................................................55

Procedure 2.  Update the Software ...........................................................................................................56

Procedure 3.  Calibrate the Probe Using the Scan Point System ..................................................................58

Device Disposal ................................................................................................................................................. 61

Summary of Contents for BVI 9400





















































































Reviews:

No comments