manualshive.com logo in svg

BLADDERSCAN BVI 9400, Operation & Maintenance Manual, Page: 27 / 84

Share
Download
BLADDERSCAN BVI 9400 Operation & Maintenance Manual Download Page 27

19

Operations & Maintenance Manual: Introduction

RESULTS SCREEN

The Results screen appears automatically when an ultrasound scan is complete. The display presents the 
result of the exam: crosshairs, bladder outline, and the calculated bladder volume. You may choose to print 
this result to the onboard printer and also record a voice annotation to save the exam. After the annotation is 
recorded, the Listen and Review buttons become active, and the newly recorded exam appears on the main 
display as an open blue folder icon.

Table 7. 

Results Screen Button Functions

BUTTON

FUNCTION

Record a voice annotation (up to 10 seconds long).

Print exam results to the onboard printer.

Listen to a previously recorded voice annotation. If no voice annotations are recorded, 
this button is disabled.

Go to the Review screen. If no voice annotations are recorded, this button is disabled.

Return to the Home screen.

Summary of Contents for BVI 9400





















































































Reviews:

No comments