Revision 15.00 / LB-0028
–
Cerebus Instructions for Use
22
The Central application fails to start.
Central Suite application fails to start with “The system is initializing…”
pop-up message.
Potential causes:
•
The NSP is not turned on.
•
Problems with the NSP network connection:
o
Disconnected or a bad ethernet cable.
o
Problems with the IP address or other network settings.
•
Firmware or Hardware issues on the NSP.
Troubleshooting steps:
1.
Check whether the NSP is powered on with the Firmware version visible on the and the ethernet
settings.
•
Short in power path external to the supply which can be the cable, amplifier itself,
headstages connected to amplifier.
