4
Alarm Response Action
The camera supports 2 alarm inputs which can be set to normally open (NO) or normally closed (NC). Upon having received the
alarm input signal, the dome will automatically activate a user-defined action, which can be programmed to: preset 1-8, pattern
1-4, patrol 1-8, pan scan, tilt scan, random scan, frame scan, panoramic scan, color or black and white (B&W) mode. After the alarm
is cleared, the dome is can resume its previous activity or position.
AUX Output
An auxiliary output is a configurable signal from the camera back box that can trigger another device to operate. The camera
provides one auxiliary output. The auxiliary output type can be set to NO (normally open) or NC (normally closed). The alarm dwell
time is also configurable.
Manchester Code Self-test
The camera supports Manchester code self-test for fault diagnostic. You can enable the Manchester code diagnosis function by
setting DIP switches inside the camera. The corresponding fault code will be displayed on the screen (not available during park
time) while adopting Manchester protocol.
Table 1. Descriptions of the Fault Code
Fault Code
Description
E0
Normal control
E1
Cable is disconnected
E2
Cable is connected and data can be normally received, but the address setting is incorrect
E3
Cable is connected and data can be normally received, but the command setting is incorrect
E4
Cable is connected and data can be normally received, but the settings of address and command are incorrect
E5
Cable is connected, but the received data does not comply with the requirements of Manchester code
Time Task
A time task is a preconfigured action that can be performed automatically at a specific date and time. The programmable actions
include: preset 1-8, pattern 1-4, patrol 1-4, pan scan, tilt scan, random scan, frame scan, panorama scan, day/night mode or none.
Zone
A zone is a user-defined area. The dome provides eight zones, each with configurable label. If the dome has dwelled at a zone
without receiving any command over 4 minutes, this feature will enable the dome to perform panorama scan within the zone.
Password
The dome features password protection to prevent unauthorized changes to the dome settings.
SECTION 1: INTRODUCTION
