Black Line BLK-PTZ12X, User Manual

Page: 57 / 72

49 12x PTZ Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
3. Edit the label of the zone.
a. Move the cursor to
EDIT LABEL
and click
IRIS+
to enter the edit mode.
b. Click
FOCUS+
in the PTZ control panel to switch between different character lists: capital alphabet, lowercase
alphabet, symbols and numbers. Click the up/down and left/right direction buttons to move the cursor to choose a
character to input.
c. Click
FOCUS-
to position the cursor on the label where the character needs to be modified. Click
ZOOM IN
to delete it.
d. Click IRIS+ to enter the selected character from the list into the label.
e. Click FOCUS+ to exit the character lists and click IRIS+ again to confirm and close the submenu.
4. Configure the zone area.
a. Move the cursor and click IRIS+ button to enter EDIT ZONE submenu.
b. You can see SET LEFT LIMIT on the screen. Click the direction buttons to set the left limit stop.
c. Follow the prompts on the screen to set the right limit, up limit and down limit.
d. Click
IRIS+
button to save the settings and close the menu.
5. Set the scan status. You can enable or disable the scanning in the zone. The ZONE STATUS is not editable. After editing a zone,
it is automatically switched ON. If you delete the zone, it will switch OFF.
4.9.2 TASK 2: Clear the zone settings
Move the cursor to
CLEAR ZONE
and click
IRIS+
to clear all the settings of the current zone.
4.9.3 Clearing PTZ Control Settings
You can clear all user-defined PTZ control settings, including presets, patrols, patterns, zones and time tasks. You can also clear
privacy masks on this menu. To clear control settings:
1. Open the CLEAR SETTINGS menu. Go to
MAIN MENUS
g
DOME SETTINGS
g
CLEAR SETTINGS