40
SECTION 4: USING THE OSD MENUS
d.
Follow the steps above to configure the right, up and down limit stops on the menu. The new limit stops will
overwrite the existed ones.
e.
You can clear the defined limit stops. Click
IRIS+
to enter
CLEAR STOPS
, then click
IRIS+
again to clear the stops.
4.5 Configuring Presets
A preset is a predefined direction. For the defined preset, you can click the calling button to move the camera to that direction.
4.5.1 TASK 1: Set a preset
To set a preset direction:
1.
Open the preset configuration submenu: Go to
MAIN MENUS
g
DOME SETTINGS
g
PRESETS
Presets configuration men
2.
Choose the preset number:
a.
Move the cursor to PRESET NUM and click
IRIS+
to enter.
b.
Click the up and down buttons to mark the preset number you want to edit. If the preset was defined, the preset label
is listed under the number; if it has not been defined, the label
UNDEFINED
is shown under the number.
NOTE
•
You can set up to 254 presets for the camera.
•
The system-defined presets are displayed on this submenu; they are not editable.
3.
Edit the label of the preset.
