55
12x PTZ Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
Set the password
4.12.2 Restoring default dome settings
You can reset all dome settings to factory default parameters as shown in the table below. Dome settings include mostly PTZ
parameters, alarm parameters, and some system settings, for example, the dome address.
1.
Open the default dome settings menu. Go to
MAIN MENUS
g
RESTORE DEFAULTS
2.
Click
IRIS+
to restore the dome settings to the values shown in the table below, or click
IRIS-
to exit.
Table 4. Default dome settings
Parameters
Default Value
Dome address
0
Baud rate
2400 bps
120Ω matching resistance
Off
Soft address
Off
Initial Position
Zero angle
Soft Baud rate
Off
Auto-focus
On
Zoom limit
Max. Optical Zoom
Zoom speed
High
Slow Shutter
0
IR cut filter
Auto
Backlight compensation
Off
AE mode
Auto
