29
12x PTZ Outdoor Camera User Manual
SECTION 4: USING THE OSD MENUS
Set System Time
•
Zero angle (initial position) configuration.
You can define the initial position of the camera on the ZERO ANGLE
submenu.
a.
Move the cursor to
ZERO ANGLE
using the direction buttons, then click
IRIS+
to open the menu.
b.
Click the left or right or up or down direction buttons to adjust the view angle.
c.
Click
IRIS+
button to confirm and close the menu.
•
Fan parameter configuration.
You can set the
FAN CONTROL
to TEMP, ON or OFF.
•
EIS (Electronic Image Stabilization) configuration
You can set the
EIS FUNCTION
to ON or OFF.
•
Preset direct focus
You can set the preset direct focus function to ON or OF on the PRESET DFOCUS submenu.
•
Protocol settings
You can set the
PROTOCOL STATUS SET
to ON or OFF, and set the PROTOCOL SET to AUTO MATCH, PELCP-P, PELCO-D,
Private-code, etc.
•
RS-485 checksum setting
You can set the
485CHECK SET
to ON or AUTO to improve the controlling effect.
