EDGE 540-V3 30cc Item code: BH94
.
Instruction Manual
4
REPLACEMENT SMALL PARTS
1
7
2
4
9
8
6
3
3
1)
Install the rubber grommets and brass
eyelets on to the aileron servos.
2)
Using a modeling knife, remove the
covering from over the pre-cut servo arm exit hole
on the aileron servo tray / hatch. This hole will allow
the servo arm to pass through when installing the
aileron pushrods.
1. INSTALLING THE AILERON SERVOS
Drill a hole
1.5mm
Servo tray
Remove the covering
Aileron
Bottom side.
1. Aluminium landing gear.
2. Wheel pants (left & right).
3. Wheels.
4. Fuel Tank.
6. Rudder plastic light.
7. Plastic parts for landing gear.
8. Spinner.
9. Tail gear set.
I. SERVO 1
5x50mm
2x12mm
3x12mm
5x70mm
6x20mm
3x10mm
4x12mm
