EDGE 540-V3 30cc Item code: BH94
.
Instruction Manual
9
2
) Using the hardware provided, mount the
main landing gear to the fuselage.
Push in
Aluminium
landing gear
Aluminium
landing gear
Secure
6x20mm
V. COWLING
Left side.
See pictures below:
2)
While keeping the back edge of the cowl
flush with the marks, align the front of the cowl
with the crankshaft of the engine. The front of the
cowl should be positioned so the crankshaft is in
nearly
the middle of the cowl opening. Hold the
cowl firmly in place using pieces of masking tape.
3)
Slide the cowl back over the engine and
secure it in place using four wood screws. See
picture below.
4)
Install the muffler and muffler extension
onto the engine and make the cutout in the cowl for
muffler clearance. Connect the fuel and pressure
lines to the carburetor, muffler and fuel filler valve.
1)
Slide the fiberglass cowl over the engine and
line up the back edge of the cowl with the marks
you made on the fuselage.
Bottom side.
Trim and cut
Push in
Machine screw.
3x12mm
