Configuration Menus
SERVSWITCH MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL
10
Main configuration menu
Figure 3. Main Menu
The ServSwitch MultiVideo uses a special command to establish
communication to the Unit and not a CPU. This command input is a press
and release of the left control <Ctrl> key, then the command. The
command must be entered within 2 seconds of pressing and releasing the
left control key or the ServSwitch MultiVideo re-establishes communication
with the connected CPU.
The main configuration menu is accessed from the keyboard by pressing
and releasing the left control <Ctrl> key and within 2 seconds pressing the
F12 key. The main configuration menu will display on the KVM monitor.
From this menu, you can configure the system, configure the connected
computers, the appearance or overlay of the displayed menus, and assign
unique passwords for accessing the configuration menus and a password
for accessing the connected computers. Use the up/down arrow keys to
select which section menu to configure and press enter.
Summary of Contents for ServSwitch KV0202A
Page 1: ......
Page 45: ...NOTES MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL 42...
