SERVSWITCH MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL
19
Position
This item sets the position of the computer label window on the display
screen. This position is maintained at all screen resolutions.
To change the position, select “Position” and press enter. The overlay page
will disappear and a label box will display. Use the arrow keys to move the
label box anywhere on the screen. Press enter when the desired position is
reached. The screen position values are entered automatically into the x
(horizontal) and y (vertical) fields. Setting the position off the edge of the
screen may cause an out of sync image.
Valid entries are 0 – 64 (horizontal) and 0 – 99 (vertical).
Show computer number
This sets whether the computer number and computer name are displayed
on the KVM stations monitor when a computer is selected. Select this item
and press enter. A YES/NO box will display. Use the up/down arrow keys
and select either YES or NO and press enter.
Fade out (seconds)
This controls how long the computer label displays before disappearing. A
value of zero (0) disables this function and the label will not be displayed. A
value of 255 causes the computer label to always be displayed. To change
this value, select it and press enter. An input box will display for a new
value. Enter the value wanted between 0 and 255 and press enter.
(<Ctrl> D, <Enter> will display the label at any time)
Font
This item sets the font type for the computer label. To change the font,
select “Font” and press enter. Use the up/down arrow keys to select a new
font type and press enter.
The font choices are:
n
8 x 16 modern
n
8 x 16 classic
n
16 x 24 modern
n
16 x 24 classic
n
16 x 32 modern
n
16 x 32 classic
The actual size of the font will vary depending on
the resolution of the video.
As the resolution increases, the fonts become
smaller.
The modern font is sans-serif, the classic is similar
to Times.
Summary of Contents for ServSwitch KV0202A
Page 1: ......
Page 45: ...NOTES MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL 42...
