SERVSWITCH MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL
32
PS/2 mouse gets out of sync
¾
Cabling was disturbed during mouse movement. Issue the null
command once or twice to re-sync the mouse. Update mouse driver.
Try using ctrl O command to recover if O/S is NT.
¾
Sun keyboard needs to be reset, with unit power on, disconnect and re-
connect the sun keyboard.
Video fuzzy
¾
Cable too long or wrong type. Verify that resolution and distance
match. See Appendix G. Upgrade cable if necessary.
Video not synchronized or wrong color
¾
Cable is loose, reseat cable.
¾
Monitor not capable of syncing to video selected, upgrade monitor.
¾
Cable is defective; try using cable from another computer if problem
goes away cable is defective.
¾
Port on ServSwitch MultiVideo is defective; try using another port. If
the problem goes away port is defective.
Lower resolution OK, but can’t enter high resolution mode
¾
Video driver has not been setup for this resolution. Configure the
driver.
Slave unit does not switch
¾
Maximum ports command not issued.
¾
Width or units command not configured properly. Reconfigure them to
match number of computers and how they are connected.
Summary of Contents for ServSwitch KV0202A
Page 1: ......
Page 45: ...NOTES MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL 42...
