SERVSWITCH MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL
21
Logging off the system
To log off the system and lock the keyboard enter <Ctrl> and the L key to
disconnect from the switch. To gain access to the connected computers,
an access password must be entered if one has been assigned.
Resetting the passwords
The passwords can be reset if they are ever forgotten. To reset them, first
turn off the ServSwitch MultiVideo and disconnect the power cord or power
adapter. Carefully remove the top chassis cover exposing the PCB. Put a
jumper on the two pins labeled “Password reset jumper” and power on the
switch. Call up the configure security menu and enter a new configuration
password, access password and access time. Press <Esc> to return to the
main menu. Select “Exit” and press enter. You will be prompted to save
the changes. Select “YES” and press enter. The new password settings
will be saved in flash memory. Next, turn off the ServSwitch MultiVideo and
remove the installed jumper. Replace the top chassis cover and power the
switch back up. The new passwords will be active after power is applied.
Summary of Contents for ServSwitch KV0202A
Page 1: ......
Page 45: ...NOTES MULTIVIDEO INSTALLATION AND OPERATIONS MANUAL 42...
