manualshive.com logo in svg

Black Box SERVSWITCH ACU1006DRA, User Manual

Share
Download
Black Box SERVSWITCH ACU1006DRA User Manual Download Page 14

13

CHAPTER

• Figure 1-7 for a non-serial Dual-Access KVM Extender Hub system with a Micro

Remote Hub (ACU1006DRA with ACU1006MRA).

• Figure 1-8 for a Single-Access KVM/Serial Extender Hub system

(ACU1006SRA with ACUSREM).

• Figure 1-9 for a Dual-Access KVM/Serial Extender Hub system

(ACU1006DSRA with ACUSREM).

• Figure 1-10 for a Single-Access KVM/Serial/Audio Extender Hub system with a

full-size KVM/Serial/Audio Remote Unit (ACU1006VRA with ACUVREM).

• Figure 1-11 for a Single-Access KVM/Serial/Audio Extender Hub system with a

KVM/Serial/Audio Micro Remote Unit (ACU1006VRA with ACUWREM).

• Figure 1-12 for a Single-Access KVM/Serial/Audio Extender Hub system with a

KVM/Serial/Audio Micro Remote Hub (ACU1006VRA with ACU1006MRVA).

• Figure 1-13 for a Dual-Access KVM/Serial/Audio Extender Hub system with a

full-size KVM/Serial/Audio Remote Unit (ACU1006DVRA with ACUVREM).

• Figure 1-14 for a Dual-Access KVM/Serial/Audio Extender Hub system with a

KVM/Serial/Audio Micro Remote Unit (ACU1006DVRA with ACUWREM).

• Figure 1-15 for a Dual-Access KVM/Serial/Audio Extender Hub system with a

KVM/Serial/Audio Micro Remote Hub (ACU1006DVRA with
ACU1006MRVA).

Use the indicated types of extension cables to attach CPUs to the Local Hub and
any Switching Remote Units; plug the remote keyboards, monitors, mice, and any
serial or audio devices directly into the Remotes; and (with the Dual-Access Local
Hub) plug the local keyboard, monitor, and mouse directly into the Local Hub.
Connect the Local Hub to the Remotes with straight-pinned four-pair CAT5 cable.
Power the Remotes with their included power supplies. For more information
about installation, refer to 

Chapter 6

.

CAUTION!

Connect non-serial Local Hubs to non-serial Remotes only. Similarly,
connect KVM/Serial Local Hubs only to KVM/Serial Remotes and
connect KVM/Serial/Audio Local Hubs only to KVM/Serial/Audio
Remotes. Do

not

mix any of these three types with any of the others—

for example, don’t connect a KVM/Serial Local Hub to non-serial or
KVM/Serial/Audio Remotes. Extender systems with intermixed non-
serial and/or KVM/Serial and/or KVM/Serial/Audio Extender equipment

do not work

.

Summary of Contents for SERVSWITCH ACU1006DRA





















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands