70
Primary to Basic Rate ISDN Multiplexer
SALES: 0118 965 5100
SET CONNECTION PRI command
Sets up or removes a semi-permanent connection.
Syntax
SEt CONnection PRi [port1] [timeslot]
or SEt CONnection PRi [port1] [timeslot] [port2] [channel]
or SEt CONnection PRi [port1] [timeslot] [port3] [timeslot]
port1 -
Port number(s) from 1 (for PRI 1 ) to 2 (for PRI 2)
port2 -
A port number from 1 (for BRI 1 ) to 16 (for BRI 16)
port3 -
Port number 2 (for PRI 2 )
timeslot -
Timeslot number(s) between 0 and 31 (for E1)
Timeslot number(s) between 1 and 24 (for T1)
Channel -
A b channel number between 1 (for b1) and 2 (for b2)
If port2/port3 and channel/timeslot are omitted then any existing connection is removed.
Examples:
mux [S]> set connection pri 1 1 pri 2 1
OK
mux [S]> set connection pri 1 2 bri 15 1
OK
mux [S]> set connection pri 2 3 bri 15 2
OK
Related commands
None
Menu Equivalent
Software Setup
- Connection Setup
SET DATE command
Sets the stored date.
Syntax
SEt DAte [date]
Date -
date formatted as DD/MM/YY
