118
Primary to Basic Rate ISDN Multiplexer
SALES: 0118 965 5100
Reject all incoming calls
Delete all numbers in Number Setup.
Set PRI 2 to have 0 channels in Channel Set-up
CLID generation (for outgoing calls) is not appropriate in this case.
Program the SPID's of BRI equipment as 0101 if the BRI equipment needs a SPID to make
outgoing calls.
Route all incoming calls to PRI 2
Delete all numbers in Number Setup.
Set PRI 2 to have some channels in Channel Set-up.
CLID generation (for outgoing calls) is not appropriate in this case.
Program the SPID's of BRI equipment as 0101 if the BRI equipment needs a SPID to make
outgoing calls.
Calls will be routed to PRI 2 if there is a free b channel.
Route by telephone number
Store 1 or 2 telephone number(s) (e.g. 5551234) for each basic rate interface that is to receive
incoming calls.
Program the SPID's of BRI equipment as telephone 0101 if the BRI equipment
needs a SPID to make outgoing calls or accept incoming calls. This also allows calls to be
routed to a specific TA.
For the example of 5551234
Incoming calls with Called Party Number ending 5551234 will be accepted if there is
a free b channel.
Outgoing calls (with CLID generation on) will have their Calling Party Number
checked.
Outgoing calls with Calling Party Number ending 5551234 will have their Calling
Party Number unchanged. If the endpoint identifier (linked to the SPID) is not
included then Calling Party Number will be unchanged if it matches the other number
for that interface. Otherwise, the Calling Party Number will be changed. The new
Calling Party Number will be the number associated with the endpoint identifier
(linked to the SPID) if the endpoint identifier is included. If the endpoint identifier is
not included then the first number for that interface will be used.
