CHAPTER 4: Configuration
37
4.3.2 SNMP C
OMMUNITY
N
AMES
Use this menu to change the Remote Access Concentrator’s passwords from their initial factory-default values.
For security reasons, we suggest making this change at the time of your initial Concentrator installation.
Take these steps:
1. From the Local Management utility’s Module Menu, select Module Configuration.
2. From the Module Configuration menu, select SNMP Community Names. This screen will appear:
The community names correspond to the passwords you enter to access the Concentrator’s local
management utility and SNMP. Note that there are three levels of access: read-only, read-write,
and super-user.
3. Replace the default password (“public”) with your own secure selection.
Provide passwords for all three categories of access.
4. Select SAVE and then RETURN to go back to the Module Configuration menu.
