Chapter 4: Operation of Web-based Management
724-746-5500 | blackbox.com
47
Refresh: The simple counts will be refreshed manually when a user clicks on the “Refresh” button.
Clear: The simple counts will be reset to zero when a user clicks on the “Clear” button.
4.3.4 Detail Counter
The Detail Counter function counts the port traffic, whether or not the packet is good or bad. In Figure 4-19, the window can show only one
port counter information at the same time. To see another port’s counter, you have to pull down the list Select list, then the screen for the
port you chose will appear.
Each data field list is 20-digit long. If the counting overflows, the counter will be reset and restart counting. The data is updated at every
time interval defined by the user. The valid range is 3 to 10 seconds. The Refresh Interval is used to set the update frequency. Default
update time is 3 seconds.
Function name:
Detail Counter
Function description:
Display the detailed number of each port’s traffic. In Figure 4-20, the window can show all port’s information at one
time.
Figure 4-20. Detailed port statistics port 1 screen.
Parameter description:
Rx Packets: The number of packets received.
RX Octets: Total received bytes.
Rx High Priority Packets: Number of Rx packets classified as high priority.
Rx Low Priority Packets: Number of Rx packets classified as low priority.
Rx Broadcast: Show the number of broadcast packets received.
Rx Multicast: Show the number of multicast packets received.
Tx Packets: The number of packets transmitted.
TX Octets: Total transmitted bytes.
