Black Box LES1208A-R2 User Manual Download Page 234

Page: 234 / 286

_____________________________________________________________________

724-746-5500 | blackbox.com

Page 234

To enable IPv6 for all interfaces

# config -‐s config.system.ipv6.enabled=on

To configure the management LAN interface, use the same commands as above but replace:

config.interfaces.wan

, with

config.interfaces.lan

Note: Not all devices have a management LAN interface.
To configure a failover device in case of an outage:

# config -‐s config.interfaces.wan.failover.address1='ip address'

# config -‐s config.interfaces.wan.failover.address2='ip address'

# config -‐s config.interfaces.wan.failover.interface=[ eth1 | console | modem ]

The network interfaces can also be configured automatically:

# config -‐s config.interfaces.wan.mode=dhcp

# config -‐s config.interfaces.lan.mode=dhcp

The following command will synchronize the live system with the new configuration:

# /bin/config –-‐run=ipconfig

The following command will synchronize the live system with the new configuration:

# config -‐r ipconfig

14.19 Date & Time settings

To enable NTP using a server at pool.ntp.org, issue the following commands:

# config -‐s config.ntp.enabled=on

# config -‐s config.ntp.server=pool.ntp.org

Alternatively, you can manually change the clock settings:
To change running system time:

# date 092216452005.05 Format is MMDDhhmm[[CC]YY][.ss]

Then the following command will save this new system time to the hardware clock:

# /bin/hwclock -‐systohc

Alternatively, to change the hardware clock:

# /bin/hwclock -‐-‐ set -‐-‐date=092216452005.05 Format is MMDDhhmm[[CC]YY][.ss]

Then the following command will save this new hardware clock time as the system time:

# /bin/hwclock -‐hctosys

To change the timezone:

# config -‐s config.system.timezone=US/Eastern

The following command will synchronize the live system with the new configuration:

# config -‐r time

14.20 Dial-‐in settings

To enable dial-‐in access on the DB9 serial port from the command line with the following attributes:

Local IP Address

172.24.1.1

Summary of Contents for LES1208A-R2































































































































































































































































































Search results

Summary of Contents for LES1208A-R2

Reviews:

Related manuals for LES1208A-R2

Brands by name

Popular brands

Black Box LES1208A-R2, User Manual

Search results

Summary of Contents for LES1208A-R2

Reviews:

Related manuals for LES1208A-R2

Brands by name

Popular brands